The metal roofing roll forming machine is composed of material discharging, forming and post forming cutting. The products are flat and beautiful in appearance, uniform in paint pattern, high in strength and durable. Metal roofing roll forming machines are widely used in industrial civil buildings such as factory buildings, warehouses and garages. Hangars, stadiums, exhibition halls, theaters, and other house and walls.

The metal roofing roll forming machine is broadly divided into three main parts:

Electronic control part: Traditional injection machines use contact type relays to switch various actions, often due to loose contact screws and contact aging. Usually after one million uses, new ones should be replaced to ensure electronically controlled stability. In particular, environmental factors such as dust adhesion and air humidity will also affect the machine. Modern injection molding machines use contactless integrated circuits, which greatly reduce the connection of wires, significantly improving the undesired phenomena caused by wires, and improving stability.

Hydraulic pressure: Hydraulic pressure system should pay attention to the cleanliness of the hydraulic oil to maintain the quality of the hydraulic oil, should use good stability, high quality of the hydraulic oil, in addition to regular replacement, it should properly control its operating temperature 50C The following is to prevent the stability of the hydraulic operation due to deterioration.

Mechanism: The part of the mechanism should be regularly maintained to reduce friction coefficient and reduce wear. The nuts and locking screws on the head plate should be inspected periodically to avoid breaking of the column by uneven force. The mold thickness adjustment mechanism should periodically check the shaft gear or chain for deflection or looseness. Whether the screw on the gear plate is loose or if the grease is sufficient.