Rolling shutters making machine is a typical product of rolling equipment. It is widely used by rolling shutter manufacturers. The following are some tips on how to maintain rolling shutters making machine:

First of all, keep the surroundings of the motor of the rolling shutters making machine dry, and the humidity will shorten the motor life of the rolling shutters making machine. The air inlet and outlet of the motor must be kept free of foreign objects, lines, and fibers to hinder the operation of the motor.

Secondly, when the motor thermal protection of the rolling shutters making machine works, it should be stopped immediately. Check the reason why the motor of the rolling shutters making machine generates thermal protection. Generally, there are some thermal protection functions:
1. The motor of the roller shutter door device is overloaded (the traction force is not enough).
2. The use time of the roller shutter door motor is too long
3. The setting of the motor thermal protection function is lowered

Exclude the possibility of the above three points, in order to normal use of rolling shutters making machine, the motor working time for a long time to be coated with lubricants, so as to ensure that the motor wear and tear reduction, better heat dissipation, it is recommended that the lubricant. The use of a good lubricant can greatly increase the stability of the motor. When it encounters poor quality lubricants, it should be replaced in time and clean the bearing and the oil groove of the bearing cap with gasoline. Then pay attention to the noise emitted by the motor for a long time. Pay attention to whether or not the bearings of the motor have been worn out.
When the direction of the bearing's movement is downstream, you should replace the bearings immediately and you cannot use the motor. If not, replace the bearings immediately. It may be necessary to replace the entire motor.