oil road maintenance method of metal roofing roll forming machine

The metal roofing roll forming machine adopts high-level automatic control software to realize the production information management. The whole unit automatic control system adopts a highly integrated network, which makes the performance of the automation system more superior. The metal roofing roll forming machine also has operations, maintenance, maintenance and machinery. Debugging, easy mold replacement and other advantages.

First, hydraulic circuit

If the maintenance of the hydraulic system should also be checked, 
1. Check the oil level of the tank every week. Oil level below the oil window should be filled with hydraulic oil;Do not exceed 70°C. 

2. The system oil temperature should be between 35°C and 60°C. If it is too high, it will cause deterioration of oil and accessories.

Second, the filter

The filter should be replaced or thoroughly cleaned; 
1. At each oil change.Check and wash every 3 months, 

2. Air filter on the tank. It is best to replace it in 1 year.Should be replaced; 

3. The machine has other alarms such as abnormal alarm or oil quality.

Third, hydraulic components

1. Clean hydraulic components (substrates, valves, motors, pumps, tubing, etc.) monthly to prevent dirt from entering the system.Check whether there are any deformations in the bends of the tubing machine. 

2. After one month, the new machine is used. If there is abnormality, it should be replaced. After two months of use, the joints of all accessories should be tightened. When this work is done, the connection should be turned off and the system should be free of pressure.